Specialty Primers
Showing all 7 results
-
MORE INFOAquaprime
100% Acrylic, Water Based, High pH Primer. Designed to maximize the adhesion of premium grade paints and elastomeric topcoats.
Features:
- GREEN/Universally Compliant
- Ideal for Surfaces With a pH <16
- Primer for Drywall
- Excellent Resistance to high Alkali, Efflorescence, Erosion Mold Mildew, Etc.
Item #5900
-
MORE INFOMoisture Vapor Barrier
100% solids epoxy primer designed for use on interior and exterior concrete floor surfaces with a high moisture content. This high performance primer creates a barrier to stop moisture vapor from traveling through the substrate and negatively impacting the surface coatings. The low viscosity formula promotes deep penetration into the concrete sealing and blocking moisture for a long lasting topcoat application. Monochem Moisture Vapor Barrier also has a low odor that minimizes down time in occupied spaces. Available in a clear, high-gloss that can be topcoated with most high performance floor coating systems.
Features:
- 100% Solids, Low Viscosity
- Controls Moisture Vapor < 25lbs
- Excellent Concrete Adhesion
- High pH Resistant
- One Coat Application
- Low Odor & VOC
Item #2125
-
MORE INFOMonobond Direct-To-Metal (RI)
Waterborne, acrylic primer designed for most interior and exterior metal surfaces. This high performance primer provides excellent adhesion with added corrosion and rust protection. Monobond Direct-To-Metal can be used on most vertical and horizontal metal surfaces making it an excellent solution for doors, trim, gates, fences, handrails, stairs, walkways and much more. Available in a White or Neutral tint base for a full range of color options.
Features:
- Excellent Adhesion
- Corrosion Resistant
- Flash Rust Inhibitive
- Fast Dry & Recoat
- USDA Complaint
- Low Odor & VOC
Built For:
- Interior & Exterior
- Vertical & Horizontal Metal Surfaces
- Topcoat with Latex or Alkyd Finishes
Safety Data Sheet: White Base; Neutral Base
Item #: White Base 1890; Neutral Base 1880
-
MORE INFOMonobond High Adhesion Primer
Waterborne, urethane acrylic bonding primer and sealer designed for most interior and exterior hard-to-stick surfaces. This high performance primer provides excellent adhesion with fast dry and recoat times allowing projects to be completed quickly and confidently. Monobond High Adhesion can be used on most vertical and horizontal surfaces making it an excellent solution for walls, doors, trim, cabinets, handrails, floors, walkways and much more.
Features:
- Excellent Adhesion
- Seals Bare Surfaces
- Fast Dry & Recoat
- Easy-to-Sand
- USDA Compliant
- Low Odor & VOC
Built For:
- Interior & Exterior
- Vertical & Horizontal Hard-to-Stick Surfaces
- Topcoat with Latex, Alkyd, Epoxy, or Urethane Finishes
Safety Data Sheet – Monobond White Base
-
MORE INFOMonochem 21
Two-Part, 100% Solids, Epoxy Primer/Topcoat. High gloss and available in clear, 20 standard colors, and any custom match.
Non-Skid Floor Additive Option – Monotex 20
Features:
- GREEN & Universally Compliant & USDA Approved
- Excellent Adhesion
- Hot Tire, Abrasion & Chemical Resistance
- Clear or Any Custom Color High Build
- Self-Leveling
- Solvent-Free
Item #2121, #2120
-
MORE INFOMonochem 45
Two-Part, 100% Solids, Epoxy Primer/Topcoat with Extended Pot Life. High gloss and available in clear, 20 standard colors, and any custom match.
Non-Skid Floor Additive Option – Monotex 20
Features:
- GREEN & Universally Compliant & USDA Approved
- Excellent Adhesion
- Hot Tire, Abrasion & Chemical Resistance
- Clear or Any Custom Color High Build
- Self-Leveling
- Solvent-Free
Item #4545
-
MORE INFOMulti-Seal
Waterborne, acrylic clear sealer, conditioner, and primer designed for use on interior and exterior wall and floor surfaces. This premium quality coating provides excellent adhesion over new, aged, and damaged surfaces. The low viscosity formula quickly penetrates surfaces creating a tight seal that reduces preparation and application time.
Multi-Seal can be used across a wide variety of projects including sealing and conditioning new concrete and stucco, priming and adhering to dusty and chalky surfaces, repairing torn drywall, sealing floors, topcoating previous coatings for added durability and sheen, and much more. Multi-Seal can be painted over with most conventional and elastomeric coatings or left as a clear topcoat on its own.
Features:
- Low Viscosity / Penetrating Clear
- Seals & Primes Bare Surfaces
- Resists High pH <13 & Efflorescence
- Binds to Light Dust & Chalk
- Seals Torn Drywall
- Dustproofs & Hardens Stucco, Concrete, & Masonry
- Excellent Adhesion Over Previous Coatings
- Use as a Topcoat Over Bare or Previously Painted Surfaces for Added Protection & Easier Cleaning
- UV Resistant
- Low Odor & VOC
Built For:
- Interior & Exterior
- Horizontal & Vertical
- Stucco, Concrete, Brick & Masonry
- Drywall & Plaster
- Wood
- Non-Ferrous Metal
- Previously Painted Surfaces
Item #6300